Transition Compression Terminal Clamps Heat Resistant Double Conductor

Custom electric power accessories clamp

Product Description

Type C clamp is a non-load-bearing connection fitting. It can only be used for the connection and jumper of the wire. Can be aluminum-aluminum, copper-aluminum, copper-copper, copper-iron, aluminum-iron connection. No copper-clad tape is required for installation, and the operation is simple.

SYG-Q compression terminal clamps are adopted copper & aluminum welding through brazing combination. They are suitable for permanent connection. On production, the terminal plates of clamps are not being drilled, and therefore they needs to be drilled in accordance with the factual terminal outlet plate dimensions for electric device when installation. In addition, the conductors that terminal clamps match are all routine conductors, available for other conductors with normal conductor diameter parameters subjected to terminal clamps.

SSY & SSYG-N Type Compression Terminal Clamps for Double Wire are applicable to connect copper conductor with aluminum terminal of electric device, qualified for good electric contact performance suitable for permanent connection.

H-type clamp is a non-load-bearing type fitting. The product uses a material similar to aluminum wire. At different ambient temperatures, the clamp and the wire are synchronized with the thermal expansion and contraction of the wire, and the electrical performance is extremely stable.

After crimping, the clamp and the conductor are integrated into one body, and the conductor is completely and completely covered. There is no void at the contact point between the conductor and the trunk. The resistance is low and the temperature rise is low. The conductive groove is coated with conductive paste in the trunk of the clamp. Removing the aluminum chloride film of the wire can increase the contact area. Adopting the design scheme of increasing the anode, the aluminum connection of the pot can avoid the influence of electric corrosion.

Package & shipping
 

To assure our products qualified ,we take steps as follows :

1. Management team : We have employed the experienced senior experts to take charge of the whole management ,especially the technical management and quality management

2.Introducing ISO management :We are aware of ISO 9001:2008 certificate

3.QC Inspection:It is our company policy that all the finished products should be inspected by our specialized QC in every manufacture step and before each shipment

FAQ

1. Price Term: FOB, CFR or CIF. Shipping seaport: Shanghai Seaport. For FOB, CFR or CIF price, please specify which exact model you need, then tell us quantity of your order so that we can calculate the local transport charge and sea freight

2. MOQ: 10 pieces for Customized

3. Payment: Typically 30% by T/T as a deposit,balance by T/T or L/C at sight before shipment. Other payment way can be negotiated

4. Delivery time : goods can be ready for shipment within 7 workdays after receiving deposit

5 Warranty : 20 years

Our service

1. Reply your inquiry in 24 working hours

2. Experienced staffs answer all your questions in fluent English

3.The product model can be customized

4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff

5. Special discount and protection of sales are provided to our distributor

6. Professional factory : competitive with good quantity

7 Sample: We can send out sample in one week if the order quantity is big enough. But the shipment charges is usually paid by your side, the charges will be rebounded when we have formal order

8. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature.Welcometo contact us or visit our company.